8-channel 0~10v LED dimmer

  • Number of channels: 8 channels
  • interface: RS485*2
  • Power: 12VDC*2
  • Output: 8 channels 0-10V/25MA
  • Power supply: DC12V1A
  • Installation method: DIN rail installation
  • Address: Digital tube display Decimal address, key setting
  • Standard sizes: 160mm*88mm*59mm
RICHIESTA

Introduzione

It’s an DIN-rail 8-way dimming module (0-10V) use RS-485 bus control structure, Used to adjust the brightness of the light. The controller has 8 channels 0-10V analog output, with 0-10V LED lamp dimmer driver can achieve led Light continuous reading control. Can be matched 8 keys, 6 Key panel and Used in various network central control systems to programmatically control light brightness.

Technical Parameters

  • Number of channels: 8 channels
  • interface: RS485*2
  • Power: 12VDC*2
  • Output: 8 channels 0-10V/25MA
  • Power supply: DC12V1A
  • Installation method: DIN rail installation
  • Address: Digital tube display Decimal address, key setting
  • Standard sizes: 160mm*88mm*59mm

Connection Diagram

Control commands:

Baud rate 9600, data bits 8, Check bit N, stop bit 1

Default address: 0x01, broadcast address: 0x00, when controlling all modules on the bus, use the broadcast address 00

Function Head address Order data 1 data 2 Data 3 Ending
Independent control of a certain road (rapid change, gradual change) 0x21 0x00-FF 0x80 01-08 (aisle) time brightness 0xAA
Independent control of a certain road +5% 0x21 0x00-FF 0x81 0x00 0xAA
Independent control of a certain road -5% 0x21 0x00-FF 0x82 0x00 0xAA
Control multiple channels simultaneously 0x21 0x00-FF 0x83 aisle ZZ time brightness 0xAA
Breathe, when receiving After the stop command, stop breathing 0x21 0x00-FF 0x84 aisle ZZ time 0x00 0xAA
Stop the current implement 0x21 0x00-FF 0x85 aisle ZZ 0x00 0x00 0xAA
Query Status 0x21 0x00-FF 0x88 0x00 0x00 0x00 0xAA
Change the baud rate 0x21 0x00-FF 0x89 Baud rate 0x00 0x00 0xAA
Save the current state (Second When you save for the next time , overwrite the last state ), transfer state 0x21 0x00-FF 0x8A 01 save

02 transfer

01-FF 0x00 0xAA
Set the module to power off Post-restart status

(Default is full brightness)

0x21 0x00-FF 0x8B 01 Current Status

02 Darkest state

03Brightest state

0x00 0x00 0xAA

 

Recensioni

Non ci sono ancora recensioni.

Recensisci per primo "8-channel 0~10v LED dimmer".

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *

Torna in alto